| Without
the Jackstrap®, this 4 foot jack is almost maxed out and
the Jeep's tire is not even off the ground yet!
Installing the Jackstrap® is simple. To begin, install it
before jacking up the vehicle. For removal, make sure the vehicle
is back on the ground all pressure is off the jack before releasing
the Jackstrap®.
Note: The Jackstrap®
does not fit all vehicles. Some vehicles will
require special brackets or holes to allow for upper hook attachment.
For vehicles up to 5,000 lbs.
Danger: Keep out from under the vehicle when
using the Jackstrap®. Also keep the strap away from sharp
edges or extreme heat.
Discard the strap if it becomes frayed or damaged.
|